Are you struggling to connect your ZTE Axon 40 Pro to your computer because it is not getting detected? While trying to root/flash stock ROM/Recovery or Flash Custom Recovery like TWRP/CWM or flash custom ROM on your ZTE Axon 40 Pro?
Then you are at the right place; here, we have shared ZTE Axon 40 Pro USB Drivers. Download and install the latest USB Drivers to fix all issues.
As ZTE Axon 40 Pro is an Android device, you do not need USB Drivers for simple tasks such as Transferring Photos, Videos, Files, USB Driver for that are already installed on your computer.
However, if you plan to do modifications like rooting, you need to download the USB Drivers.
ZTE Axon 40 Pro was released on 2022, May 31 with Android 12, MyOS 12. It sports a 6.67" screen with a resolution of 1080x2400 pixels, and 128GB/256GB/512GB storage, no card slot, 8/12GB RAM paired with Snapdragon 870 5G, and a 5000mAh Li-Po Battery.
ZTE Axon 40 Pro USB Drivers Download
There are different types of USB Drivers for every phone, and each serves another purpose. Read the information below drivers to find the correct one for your device.
ADB Drivers - For Rooting, Flashing, Debugging and more
Through ADB, we can control android devices by sending commands from the computer.
Download and install this USB Driver if you want to unlock the bootloader, root, flash custom/stock ROM or flash stock/custom recovery on your ZTE Axon 40 Pro.
How to Install ZTE Axon 40 Pro USB Drivers
Installing ZTE OEM USB Drivers
Installing OEM(Official) USB Drivers is relatively easy as it comes with an Installer. Most people would not need assistance; however, you can follow the steps below if you want to install ZTE USB Drivers for Axon 40 Pro.
Installing ZTE Axon 40 Pro ADB Drivers
- Download the driver from the link above and unzip.
- Press "Windows Button + R" simultaneously and then on the “Run” window, type “devmgmt.msc” and click the “OK” button.
- Select “DESKTOPXXX” or “LAPTOPXXX” and then click on “Action” and then select “Add legacy hardware.”
- A new window will open, click “Next” and then choose the second option.
- Choose “Show All Devices” and then click the “Next” button.
- Click on the “Have Disk” button, a new window will pop up on your screen.
- Click on the “Browser” button and then locate the driver’s folder that you unzipped in step one and then select “android_winusb.inf” and click the “Open” button.
- After the window closes, click on the “OK” button on the top right.
- Select “Android ADB Interface” and then click on the “Next” button.
- Now the driver is ready to be installed, click the “Next” button to install the driver finally.
- You will see “Android ADB Interface” under Android Device in Device Manager. Restart your computer and then plug in your smartphone.
Troubleshooting ZTE Axon 40 Pro not detected by the computer
The most common mistake people make is not selecting the appropriate USB mode:
Plugin your ZTE Axon 40 Pro to your computer and then unlock your smartphone; you will see “Charging via USB”. This message can be different; click it and then choose “File Transfer” or any other mode that you want to use.
You will see your device on the computer.
If you do not see your device, it can be due to one of the following problems.
- Faulty USB Port - The USB Port might not be working; if you are on a desktop, try a USB Port from the back of your CPU.
- Faulty USB Cable - Try a different Cable.
- USB Port Jammed - Your Phone’s USB Port might be jammed, and therefore the cable is not able to make contact with your smartphone. Clean the port with a toothpick and try again.