Are you struggling to connect your Sharp Aquos Crystal 2 to your computer because it is not getting detected? While trying to root/flash stock ROM/Recovery or Flash Custom Recovery like TWRP/CWM or flash custom ROM on your Sharp Aquos Crystal 2?
Then you are at the right place; here, we have shared Sharp Aquos Crystal 2 USB Drivers. Download and install the latest USB Drivers to fix all issues.
As Sharp Aquos Crystal 2 is an Android device, you do not need USB Drivers for simple tasks such as Transferring Photos, Videos, Files, USB Driver for that are already installed on your computer.
However, if you plan to do modifications like rooting, you need to download the USB Drivers.
Sharp Aquos Crystal 2 was released on 2015, July with Android 5.0. It sports a 5.2" screen with a resolution of 720x1280 pixels, and 16GB storage, microSDXC, 2GB RAM paired with Snapdragon 400, and a 2030mAh Li-Ion Battery.
Sharp Aquos Crystal 2 USB Drivers Download
There are different types of USB Drivers for every phone, and each serves another purpose. Read the information below drivers to find the correct one for your device.
ADB Drivers - For Rooting, Flashing, Debugging and more
Through ADB, we can control android devices by sending commands from the computer.
Download and install this USB Driver if you want to unlock the bootloader, root, flash custom/stock ROM or flash stock/custom recovery on your Sharp Aquos Crystal 2.
How to Install Sharp Aquos Crystal 2 USB Drivers
Installing Sharp Aquos Crystal 2 ADB Drivers
Follow the steps below to install the latest Sharp USB Drivers for Aquos Crystal 2.
- Download the driver from the link above and unzip.
- Press "Windows Button + R" simultaneously and then on the “Run” window, type “devmgmt.msc” and click the “OK” button.
- Select “DESKTOPXXX” or “LAPTOPXXX” and then click on “Action” and then select “Add legacy hardware.”
- A new window will open, click “Next” and then choose the second option.
- Choose “Show All Devices” and then click the “Next” button.
- Click on the “Have Disk” button, a new window will pop up on your screen.
- Click on the “Browser” button and then locate the driver’s folder that you unzipped in step one and then select “android_winusb.inf” and click the “Open” button.
- After the window closes, click on the “OK” button on the top right.
- Select “Android ADB Interface” and then click on the “Next” button.
- Now the driver is ready to be installed, click the “Next” button to install the driver finally.
- You will see “Android ADB Interface” under Android Device in Device Manager. Restart your computer and then plug in your smartphone.
Troubleshooting Sharp Aquos Crystal 2 not detected by the computer
The most common mistake people make is not selecting the appropriate USB mode:
Plugin your Sharp Aquos Crystal 2 to your computer and then unlock your smartphone; you will see “Charging via USB”. This message can be different; click it and then choose “File Transfer” or any other mode that you want to use.
You will see your device on the computer.
If you do not see your device, it can be due to one of the following problems.
- Faulty USB Port - The USB Port might not be working; if you are on a desktop, try a USB Port from the back of your CPU.
- Faulty USB Cable - Try a different Cable.
- USB Port Jammed - Your Phone’s USB Port might be jammed, and therefore the cable is not able to make contact with your smartphone. Clean the port with a toothpick and try again.