Asus Zenwatch 3 WI503Q – USB Drivers

Are you struggling to connect your Asus Zenwatch 3 WI503Q to your computer because it is not getting detected? While trying to root/flash stock ROM/Recovery or Flash Custom Recovery like TWRP/CWM or flash custom ROM on your Asus Zenwatch 3 WI503Q?

Then you are at the right place; here, we have shared Asus Zenwatch 3 WI503Q USB Drivers. Download and install the latest USB Drivers to fix all issues.

As Asus Zenwatch 3 WI503Q is an Android device, you do not need USB Drivers for simple tasks such as Transferring Photos, Videos, Files, USB Driver for that are already installed on your computer.

However, if you plan to do modifications like rooting, you need to download the USB Drivers.

Asus Zenwatch 3 WI503Q was released on 2016, December with Android Wear OS 2.1. It sports a 1.39" screen with a resolution of 400x400 pixels, and 4GB 512MB RAM storage, no card slot, 512MB RAM paired with Snapdragon Wear 2100, and a 341mAh Li-Ion Battery.

Asus Zenwatch 3 WI503Q USB Drivers Download

There are different types of USB Drivers for every phone, and each serves another purpose. Read the information below drivers to find the correct one for your device.

ADB Drivers - For Rooting, Flashing, Debugging and more

Through ADB, we can control android devices by sending commands from the computer.

Download and install this USB Driver if you want to unlock the bootloader, root, flash custom/stock ROM or flash stock/custom recovery on your Asus Zenwatch 3 WI503Q.

Driver Name:Asus Zenwatch 3 WI503Q ADB Drivers
Package Name:adb-drivers.zip
Publisher:Google
Driver Size:8 MB
Installation Guide:Follow these Instructions
Download

How to Install Asus Zenwatch 3 WI503Q USB Drivers

Installing Asus Zenwatch 3 WI503Q ADB Drivers

Follow the steps below to install the latest ASUS USB Drivers for Asus Zenwatch 3 WI503Q.

  1. Download the driver from the link above and unzip.
  2. Press "Windows Button + R" simultaneously and then on the “Run” window, type “devmgmt.msc” and click the “OK” button. Asus Zenwatch 3 WI503Q USB Drivers Installation Step One
  3. Select “DESKTOPXXX” or “LAPTOPXXX” and then click on “Action” and then select “Add legacy hardware.
  4. A new window will open, click “Next” and then choose the second option.
  5.  Choose “Show All Devices” and then click the “Next” button.
  6. Click on the “Have Disk” button, a new window will pop up on your screen.
  7. Click on the “Browser” button and then locate the driver’s folder that you unzipped in step one and then select “android_winusb.inf” and click the “Open” button.
  8. After the window closes, click on the “OK” button on the top right.
  9. Select “Android ADB Interface” and then click on the “Next” button.
  10. Now the driver is ready to be installed, click the “Next” button to install the driver finally.
  11. You will see “Android ADB Interface” under Android Device in Device Manager. Restart your computer and then plug in your smartphone.

Troubleshooting Asus Zenwatch 3 WI503Q not detected by the computer

The most common mistake people make is not selecting the appropriate USB mode:

Plugin your Asus Zenwatch 3 WI503Q to your computer and then unlock your smartphone; you will see “Charging via USB”. This message can be different; click it and then choose “File Transfer” or any other mode that you want to use.

You will see your device on the computer.

If you do not see your device, it can be due to one of the following problems.

  1. Faulty USB Port - The USB Port might not be working; if you are on a desktop, try a USB Port from the back of your CPU.
  2. Faulty USB Cable - Try a different Cable.
  3. USB Port Jammed - Your Phone’s USB Port might be jammed, and therefore the cable is not able to make contact with your smartphone. Clean the port with a toothpick and try again.
If you tried all the above methods, the USB Port might be dead. Get it changed from an Authorized Service Center.

Leave a Reply

Your email address will not be published. Required fields are marked *