Are you struggling to connect your Asus Pegasus 2 Plus to your computer because it is not getting detected? While trying to root/flash stock ROM/Recovery or Flash Custom Recovery like TWRP/CWM or flash custom ROM on your Asus Pegasus 2 Plus?
Then you are at the right place; here, we have shared Asus Pegasus 2 Plus USB Drivers. Download and install the latest USB Drivers to fix all issues.
As Asus Pegasus 2 Plus is an Android device, you do not need USB Drivers for simple tasks such as Transferring Photos, Videos, Files, USB Driver for that are already installed on your computer.
However, if you plan to do modifications like rooting, you need to download the USB Drivers.
Asus Pegasus 2 Plus was released on 2015, December with Android 5.1.1. It sports a 5.5" screen with a resolution of 1080x1920 pixels, and 32GB storage, microSDHC, 3GB RAM paired with Snapdragon 615, and a 3030mAh Li-Po Battery.
Asus Pegasus 2 Plus USB Drivers Download
There are different types of USB Drivers for every phone, and each serves another purpose. Read the information below drivers to find the correct one for your device.
ADB Drivers - For Rooting, Flashing, Debugging and more
Through ADB, we can control android devices by sending commands from the computer.
Download and install this USB Driver if you want to unlock the bootloader, root, flash custom/stock ROM or flash stock/custom recovery on your Asus Pegasus 2 Plus.
How to Install Asus Pegasus 2 Plus USB Drivers
Installing Asus Pegasus 2 Plus ADB Drivers
Follow the steps below to install the latest ASUS USB Drivers for Asus Pegasus 2 Plus.
- Download the driver from the link above and unzip.
- Press "Windows Button + R" simultaneously and then on the “Run” window, type “devmgmt.msc” and click the “OK” button.
- Select “DESKTOPXXX” or “LAPTOPXXX” and then click on “Action” and then select “Add legacy hardware.”
- A new window will open, click “Next” and then choose the second option.
- Choose “Show All Devices” and then click the “Next” button.
- Click on the “Have Disk” button, a new window will pop up on your screen.
- Click on the “Browser” button and then locate the driver’s folder that you unzipped in step one and then select “android_winusb.inf” and click the “Open” button.
- After the window closes, click on the “OK” button on the top right.
- Select “Android ADB Interface” and then click on the “Next” button.
- Now the driver is ready to be installed, click the “Next” button to install the driver finally.
- You will see “Android ADB Interface” under Android Device in Device Manager. Restart your computer and then plug in your smartphone.
Troubleshooting Asus Pegasus 2 Plus not detected by the computer
The most common mistake people make is not selecting the appropriate USB mode:
Plugin your Asus Pegasus 2 Plus to your computer and then unlock your smartphone; you will see “Charging via USB”. This message can be different; click it and then choose “File Transfer” or any other mode that you want to use.
You will see your device on the computer.
If you do not see your device, it can be due to one of the following problems.
- Faulty USB Port - The USB Port might not be working; if you are on a desktop, try a USB Port from the back of your CPU.
- Faulty USB Cable - Try a different Cable.
- USB Port Jammed - Your Phone’s USB Port might be jammed, and therefore the cable is not able to make contact with your smartphone. Clean the port with a toothpick and try again.