Acer Liquid Z6 Plus – USB Drivers

Are you struggling to connect your Acer Liquid Z6 Plus to your computer because it is not getting detected? While trying to root/flash stock ROM/Recovery or Flash Custom Recovery like TWRP/CWM or flash custom ROM on your Acer Liquid Z6 Plus?

Then you are at the right place; here, we have shared Acer Liquid Z6 Plus USB Drivers. Download and install the latest USB Drivers to fix all issues.

As Acer Liquid Z6 Plus is an Android device, you do not need USB Drivers for simple tasks such as Transferring Photos, Videos, Files, USB Driver for that are already installed on your computer.

However, if you plan to do modifications like rooting, you need to download the USB Drivers.

Acer Liquid Z6 Plus was released on 2016, December with Android 6.0. It sports a 5.5" screen with a resolution of 1080x1920 pixels, and 32GB storage, microSDXC, 3GB RAM paired with MT6753, and a 4080mAh Li-Po Battery.

Acer Liquid Z6 Plus USB Drivers Download

There are different types of USB Drivers for every phone, and each serves another purpose. Read the information below drivers to find the correct one for your device.

ADB Drivers - For Rooting, Flashing, Debugging and more

Through ADB, we can control android devices by sending commands from the computer.

Download and install this USB Driver if you want to unlock the bootloader, root, flash custom/stock ROM or flash stock/custom recovery on your Acer Liquid Z6 Plus.

Driver Name:Acer Liquid Z6 Plus ADB Drivers
Package Name:adb-drivers.zip
Publisher:Google
Driver Size:8 MB
Installation Guide:Follow these Instructions
Download

How to Install Acer Liquid Z6 Plus USB Drivers

Installing Acer Liquid Z6 Plus ADB Drivers

Follow the steps below to install the latest Acer USB Drivers for Liquid Z6 Plus.

  1. Download the driver from the link above and unzip.
  2. Press "Windows Button + R" simultaneously and then on the “Run” window, type “devmgmt.msc” and click the “OK” button. Acer Liquid Z6 Plus USB Drivers Installation Step One
  3. Select “DESKTOPXXX” or “LAPTOPXXX” and then click on “Action” and then select “Add legacy hardware.
  4. A new window will open, click “Next” and then choose the second option.
  5.  Choose “Show All Devices” and then click the “Next” button.
  6. Click on the “Have Disk” button, a new window will pop up on your screen.
  7. Click on the “Browser” button and then locate the driver’s folder that you unzipped in step one and then select “android_winusb.inf” and click the “Open” button.
  8. After the window closes, click on the “OK” button on the top right.
  9. Select “Android ADB Interface” and then click on the “Next” button.
  10. Now the driver is ready to be installed, click the “Next” button to install the driver finally.
  11. You will see “Android ADB Interface” under Android Device in Device Manager. Restart your computer and then plug in your smartphone.

Troubleshooting Acer Liquid Z6 Plus not detected by the computer

The most common mistake people make is not selecting the appropriate USB mode:

Plugin your Acer Liquid Z6 Plus to your computer and then unlock your smartphone; you will see “Charging via USB”. This message can be different; click it and then choose “File Transfer” or any other mode that you want to use.

You will see your device on the computer.

If you do not see your device, it can be due to one of the following problems.

  1. Faulty USB Port - The USB Port might not be working; if you are on a desktop, try a USB Port from the back of your CPU.
  2. Faulty USB Cable - Try a different Cable.
  3. USB Port Jammed - Your Phone’s USB Port might be jammed, and therefore the cable is not able to make contact with your smartphone. Clean the port with a toothpick and try again.
If you tried all the above methods, the USB Port might be dead. Get it changed from an Authorized Service Center.

Leave a Reply

Your email address will not be published. Required fields are marked *